欢迎访问,福州市优德88手机中文版优德88官方网APP有限公司 - 官方网站!

地址 :福建省-福州市-闽清县-池园镇-池园村-里洋13号
E-mail:88002460@qq.com

Copyright  © 福州市优德88手机中文版优德88官方网APP有限公司  版权所有 ALL RIGHTS RESERVED.  闽ICP备11004590号-1

优德88手机中文版优德88官方网APP-咨询服务热线 / Service Hotline:

扫一扫,访问手机版

暂时没有内容信息显示
请先在网站后台添加数据记录。
/
/
蜂窝陶瓷w优德88w体 / Honeycomb Ceramic Regenerator
产品名称

蜂窝陶瓷w优德88w体 / Honeycomb Ceramic Regenerator

我要询价
产品描述
w优德88w式热力焚烧炉(RTO) 的关键部件一蜂窝陶瓷w优德88w体, 具有单位体积焕热面积大、传热快、气流阻力小,透热深度浅、热效率高等优点。
 
目前,蜂窝陶瓷w优德88w体的孔型以方孔为主,在实际使用中,方孔蜂窝陶瓷w优德88w体存有在以下两个问题:A.蜂窝陶瓷w优德88w体的十字筋容易堵塞上下两层蜂窝陶瓷,从而加大蜂窝陶瓷的压降; B.由于气流通过蜂窝陶瓷直孔时,没有水平方向的流动,无法保证横截面上气流的均匀性;所以造成实际的热回收率要小于理论热回收率。
 
为了解决以上方孔蜂窝陶瓷w优德88w体普遍存在的问题,通过对蜂窝陶瓷产品的结构和生产工艺的创新,我公司开发生产的w优德88w式热力焚烧炉专用蜂窝陶瓷w优德88w体一片状组合式蜂窝陶瓷w优德88w体, 内部蜂窝结构采用"T"形排列设计,代替了原有普通蜂窝陶瓷的“+”形方孔结构排列,解决了产品在使用过程中的堵孔情况;同时,内部蜂窝孔具有连通式结构,增加空隙率,减少气流压降,改善整个截面上气体分布,使气体分布更均匀,提高了设备热回收效率。
 
1、产品型号: 160型、180型和200型
2、产品规格: 305mm x 305mm x 101mm; 101mm x 101mm x 101mm
 
Ceramic honeycomb regenerator, the key component of regenerative thermal incinerator (RTO), has the advantages of large heating area per unit volume, fast heat transfer, small airflow resistance, shallow heat transmission depth and high thermal efficiency.
 
At present, the holes of honeycomb ceramic regenerator are mainly square holes. In practical use, the honeycomb ceramic regenerator with square holes has the following two problems: A. The cross bars of honeycomb ceramic regenerator are easy to block the upper and lower layers of honeycomb ceramics, thus increasing the pressure drop of honeycomb ceramics; B. Because the air flow through the straight holes of honeycomb ceramics Directional flow can not guarantee the uniformity of air flow on the cross section, so the actual heat recovery rate is less than the theoretical heat recovery rate.
 
In order to solve the common problems of honeycomb ceramic regenerator with square holes, through the innovation of the structure and production technology of honeycomb ceramic products, the honeycomb ceramic regenerator for regenerative thermal incinerator specially developed by our company is a piece-like composite honeycomb ceramic regenerator. The internal honeycomb structure is designed with "T" arrangement. In addition, the inner honeycomb hole has a connected structure, which can increase the void ratio, reduce the air pressure drop, improve the gas distribution on the whole section, make the gas distribution more uniform, and improve the heat recovery efficiency of the equipment.
 
1. Product models: 160, 180 and 200
2. Product Specification: 305 mm x 305 mm x 101mm; 101mm x 101mm x 101mm
 
项目/Item
单位/Unit
200
180
160
125
125-l
S
规格/Spec
mm
305x305x101
比表面积/Specific Area
m²/m³
390
620
550
430
430
800
堆积密度/Bulk Density
Kg/m³
980
950
850
800
800
1,000
热容/Heat Capacity
J/Kg.K
900-1,100
膨胀系数/Coefficient Of Expansion
x10^(-6 )/m.k
4.5~6.5 (20~1,000)°C
耐热冲击/Heat Shock Resistance
°C
400
使用温度/End-use Temperature
°C
≤1,180
材料密度/Material Density
g/cm³
2.2-2.5
耐酸度/Acid Resistance
%
≥98
未找到相应参数组,请于后台属性模板中添加
暂未实现,敬请期待
暂未实现,敬请期待
下一篇

产品中心

/ Products